AEG Birdy - Troubleshooting Common Issues; Device Problems and Solutions

10. Troubleshooting
No display.
• Check connection of the battery.
• Install the handset in its cradle to charge the battery.
• Remove the battery from the handset, reinstall it and switch on the hand-
set.
The battery is empty.
• Check connection of the battery.
• Clean the charge contacts on handset and base set.
• Recharge the battery.
The battery indicator shows a weak battery and the handset emits the inter-
mittent warning tone.
• Recharge the battery of the handset.
The handset does not find the base.
• You are out of range, go nearer to the base.
• Check the power supply of the base.
• Subscribe the handset to a base set following the subscription procedure.
• Remove the battery from the handset, reinstall it and switch on the hand-
set.
• Disconnect the adaptor from the base set and reconnect it.
No dial tone.
• Check connection of the telephone line cord to the base set.
• Increase the speaker volume of the handset.
No dialling.
• The number you have dialled is barred.
You have forgotten your PIN code.
• Perform a full reset of the handset.
Bad voice quality (Birdy Voice only).
• Repeat what you have said speaking more slowly and close to the micro-
phone.
46