51
Remote Control - Short Manual
1. Dial your phone number. You will hear the outgoing message.
2. After the outgoing message, enter your 3-digit PIN (press each digit for 1
second). The entry will be confirmed by two tones. Enter further commands
within 10 seconds.
3. Press:
During Message Playback
• 2 to play back messages
• 2 to pause message playback + 2 to resume message playback
• 3 to go to the next message
• 11 to go to the previous message
• 6 to end message playback
• 1 to repeat the current message
• 0 to delete the current message (during message playback)
• 0 to delete all messages (after playback of all messages)
Standby
• 5 to play back OGM 1 or 2
• 1 to modify OGM 1: beep, talk + 6 to end recording
• 3 to modify OGM 2: beep, talk + 6 to end recording
• 4 to record memo + 6 to end recording
• to switch on the answering machine
• # to switch off the answering machine
✁
To Next Page
