AERMEC NRGI - Setting the season change from the calendar (heating); Setting the season change from the calendar (cooling)

18
5.6 COPY/PASTE TIME BANDS
NB: this mask is only visible if "BY CLOCK" is selected on the page "Se-
lecting the system operating mode";
This mask is used to copy and paste the time bands set for a day of the week to
another (or to all other days):
---
Plant
NOCopy to
MONDAYDay
Timezone
5.7 SETTING THE SEASON CHANGE FROM THE CALENDAR
(HEATING)
NB: this mask is only visible if "BY CALENDAR" is selected on the page
"Selecting the system operating mode";
This mask is used to set the start and end date for heating mode:
0/---
0/---
Cooling/Heating
Finish Heating
Start Heating
Calendar
Select Cool/Heat with
5.8 SETTING THE SEASON CHANGE FROM THE CALENDAR
(COOLING)
NB: this mask is only visible if "BY CALENDAR" is selected on the page
"Selecting the system operating mode";
This mask is used to set the start and end date for cooling mode:
27.0°C
13.0°C
Cooling/Heating
Set ON heating
Set ON cooling
Outdoor temperature
Select Cool/Heat with