Subject to Export Control, see Cover Page for details. 2-91
2-5. PREPARATION FOR STORAGE OR SHIPMENT
A. Packaging
Package the Test Set in the original shipping container. When using packing materials other than the
original, use the following guidelines:
Wrap the Test Set transit case in plastic packing material.
Use a double-wall cardboard shipping container.
Protect all sides with shock-absorbing material to prevent the Test Set transit case from
moving within the container.
Seal the shipping container with approved sealing tape.
Mark “FRAGILE” on the top, bottom and all sides of the shipping container.
B. Environment
The Test Set should be stored in a clean, dry environment. In high humidity environments, protect
the Test Set from temperature variations that could cause internal condensation. The following
environmental conditions apply to both shipping and storage:
Temperature: ....................................................................... -30° C to +71° C*
Relative Humidity: ........................................................................ 0% to 95%
Altitude: .................................................................................... 0 to 4600 m
Vibration: ............................................................................................. <2 g
Shock: ............................................................................................... <30 g
* The Battery must not be subjected to temperatures <-20° C or >+60° C.
To Next Page
Loading...
