2-54 Subject to Export Control, see Cover Page for details.
A. Battery
DESCRIPTION
This procedure covers: Remove. Install.
PRELIMINARY PROCEDURES
None.
CAUTION
REPLACE ONLY WITH THE BATTERY SPECIFIED. DO NOT ATTEMPT TO
INSTALL A NON-RECHARGEABLE BATTERY.
WARNING
• DISPOSE OF THE LITHIUM ION BATTERY PACK ACCORDING TO LOCAL
STANDARD SAFETY PROCEDURES. DO NOT CRUSH, INCINERATE OR
DISPOSE OF THE LITHIUM ION BATTERY PACK IN NORMAL WASTE.
• DO NOT SHORT CIRCUIT OR FORCE DISCHARGE THE LITHIUM ION
BATTERY PACK AS THIS MIGHT CAUSE THE LITHIUM ION BATTERY
PACK TO VENT, OVERHEAT OR EXPLODE.
REMOVE
1. Fully loosen the captive screws (on each side of
the bumper) in the two lower bumpers
2. Remove the bumpers from the Test Set.
To Next Page
Loading...
