Subject to Export Control, see Cover Page for details. 2-57
B. Fuse
DESCRIPTION
This procedure covers: Remove. Install.
PRELIMINARY PROCEDURES
None.
CAUTION
FOR CONTINUOUS PROTECTION AGAINST FIRE, REPLACE ONLY WITH
FUSES OF THE SPECIFIED VOLTAGE AND CURRENT RATINGS. (5 A, 32 Vdc,
Type F - Mini Blade Fuse)
REMOVE
1. Fully loosen the captive screws (on each side of
the bumper) in the two lower bumpers
2. Remove the bumpers from the Test Set.
3. Fully loosen five captive screws holding the
Battery Cover to the Test Set.
To Next Page
Loading...
