18 / 34
sign of faulty operation but is normal operating behavior.
Fault LED (red):
This LED indicates that the grid-feeding process has been terminated as a result of a
malfunction.
Please wait for about 10 minutes to verify if the malfunction is only temporarily. If
not, please contact your authorized electrician. On elimination of the error the grid
feeding process is re-started after about 5 minutes.
In the event of a fuse failure please contact your authorized electrician. In case of a
general power grid failure please wait until the problem has been resolved. The
inverter will restart automatically.
7.4 LCD Display
A backlight LCD display is integrated into the inverter so that it can be easily visible.
Inverter starts up automatically when DC-power from the PV panel is sufficient.
During startup (the green led is illuminated), the LCD shows logo of company and
version of inverter.
The LCD will be initialized for 3 seconds. In the normal operation status, the display
will show the default menu as follow:
7.4.1 LCD Display
All content shows in the LCD by default：
The current output power (W)
To Next Page
Loading...
