20
11. Removal from pallet and appliance installation
1. Removing of transit brackets - Unscrew 4 screws and
remove brackets, from front and two screws from rear
(Fig. 11.1).
2. NOTE: Care must be taken not to trap mains cable.
Appliance to be removed from rear of pallet only.
Recess provided for suitable sack truck. Appliance to be
secured to sack truck with suitable straps (shaded area)
(Fig. 11.2).
3. Once appliance is in position in kitchen, remove sack
truck and straps. The front stability feet can be raised
with a spanner to allow appliance to be slid from transit
pallet (Fig. 11.3).
4. Slide cooker o transit pallet. Take care not to trap
mains cable (Fig. 11.4).
DESN 517176
Fig. 11.1
DESN 516891
DESN 517177
DESN 517178
Fig. 11.2
Fig. 11.3
Fig. 11.4
MAINS CABLE
STABILITY FOOT
To Next Page
Loading...
