AGA DC5 User Manual

32
Prior to tting the appliance top plate and hot cupboard/
electric module top plate to the appliance:-
• Ensure the self adhesive silicone strip is fitted to the
underside of the hot cupboard/electric module overlap
to protect the enamel and the jointing bracket fixing
plate is fitted to the left-hand side of the appliance top
plate.
• Fit all threads to the two end brackets.
• Fit one end bracket to the right-hand side of the
appliance top plate, placing the fibre protection washer
between the bracket and the top plate lock in position
with shakeproof washer and two hex. nuts.
• Fit the other end bracket to the left-hand side of the hot
cupboard/electric module top plate as right-hand.
16. Handrail fitting Integrated module (Gas Hob) only
Fig. 16.1
The appliance and hot cupboard/electric module top plates
can now be tted to the appliance. (DO NOT SECURE THE
APPLIANCE AND HOT CUPBOARD/ELECTRIC MODULE TOP
PLATES AT THIS STAGE).
• Place one end cap on each handrail as shown.
• Hold handrail jointing bracket away from the appliance
and locate the two handrails in the two end brackets
and the jointing bracket. Push towards the appliance.
• Position and fix the jointing bracket to the appliance
and hot cupboard/electric module top plates with
socket screws and small fibre washers ensuring jointing
bracket gasket is placed between the jointing bracket
and top plates.
• Fit the two top plates securely to the appliance with
corner stay nuts and buttons.
END BRACKET (2)
FIBRE WASHERS
(2)
SOCKET
SCREWS (2)
JOINTING BRACKET FIXING PLATE
APPLIANCE
HANDRAIL
JOINTING
BRACKET
SILICON STRIP
JOINTING BRACKET
GASKET
END CAP (4)
HOT CUPBOARD
HANDRAIL
FIBRE PROTECTION
WASHERS (2)

AGA DC5 Specifications

General

Brand	AGA
Model	DC5
Category	Ranges
Language	English