Safety
01-14 79034308 B Rev.
ENGINE SAFETY
FIG. 32: Make sure that all shields, guards and access
doors are in place and properly closed before starting the
engine.
Start the engine from the operator's seat only. Be sure
that the transmission is in neutral and the header,
separator and unloader clutches are disengaged.
Be sure that all bystanders are clear of the machine
before starting the engine.
FIG. 33: Engine is equipped with an electric starting aid.
Do not use aerosol starting fluid! Use of this fluid can
cause and explosion that can result in severe injury or
death.
TIRE SAFETY
FIG. 34: Tire explosion and or serious injury can result
from over inflation. Do not exceed the tire inflation
pressures.
Replace worn or damaged tires. When tire service is
needed, have a qualified tire mechanic service the tire.
Do not weld on the rim when a tire is installed. Welding
will cause an explosive air gas mixture that will ignite with
high temperatures. This can happen to tires that are
inflated or deflated. Removing the air or breaking the
bead is not enough.
FIG. 32
FIG. 33
FIG. 34
To Next Page
Loading...
Need help?
General
