AGCO Gleaner DynaFlex 9250 - Extremity Lights

General Information
02-10 79034308 B Rev.
Extremity Lights (Header)
FIG. 23: Header extremity lights (1) are factory installed
on the right-hand and left-hand end of the header. The
extremity lights are used to mark the ends of the header.
When harvesting, rotate the mounting tube (2) for the
extremity lights inward.
FIG. 24: When transporting with the header installed on
the machine, pivot the extremity lights (1) to the outside.
FIG. 23
1
2
Q0217815
FIG. 24
D-14608
1