AGFA ADC Solo - Safety Switches; Inside; Cassette Unit

Maintenance
DD+DIS013.02E
Section 12 / 6 ADC Solo Edition 1, Revision 10
(Type 5155 / 100/200)
3.2 Safety Switches
(1) Check both interlock switches
A and B, Figure 2.
The machine starts up only,
if both interlocks are pressed.
The power supply is only
interrupted, if the front door
(interlock A) is opened.
A
B
Figure 2
3.3 Inside
• Vacuum cleaner
• Lint free cloth
(1) Vacuum the inside of the digitizer and wipe it.
3.4 Cassette Unit
• Screw driver
• Dust brush
• Roller
(CM+9.5145.9100.0)
• Toothed belt
(CM+9.5145.5195.0)
Opener
mechanism
(1) Remove panel on right hand
side of the digitizer.
(2) Clean the opener mechanism
with a soft dust brush.
Figure 3