AGFA DR 14s - DR Detector Switch on the NX Workstation

DR Detector Switch on the NX Workstation
The DR Detector Switch is available in the title bar of the NX application. The
DR Detector Switch shows which DR Detector is active and shows its status.
The DR Detector Switch can be used to activate another DR Detector.
It is positioned in the title bar of the NX application.
Battery status
icon
(empty)
Meaning Full Medium Low Empty Wired DR Detector
Wireless DR Detector is off
or disconnected
Connec-
tion status
icon (wi-
fi/wired)
(empty)
Meaning Good Low Bad Wired DR
Detector
DR Detec-
tor is off or
disconnec-
ted
DR Detec-
tor status
icon
(blinking)
(empty)
20 | DR 14s | Introduction to the DR Detector
0350B EN 20190319 1349 *