Messages
Under certain conditions the DR Detector shows a dialog box containing a
message in the middle of the screen of the NX workstation. This message
informs the user that either a problem has occurred or that a requested action
cannot be performed. The user must read these messages carefully. They will
provide information on what to do from then on. This will be either
performing an action to resolve the problem or to contact the local service
organization. Details on the contents of messages can be found in the service
documentation which is available to local service personnel.
Related Links
Problem solving on page 98
Detector Status Indicators on page 85
36 | DR 14s | Introduction to the DR Detector
0350B EN 20190319 1349 *
To Next Page
Loading...
