Chapter 1 — Preparing the scanner 12
Locking the scanner
If you have to move the scanner over long distances, you should first lock the
scanner. This will protect the scanner’s optical carriage from possible damage.
1. Place the scanner on a horizontal, flat surface and pull it forwards until you
can see the locking slider on the underside.
2. Turn on your scanner.
The scanner’s optical assembly moves to its home position.
3. When the status indicator (the left green one) stops blinking, push the
locking slider to the left.
Your scanner is locked.
4. Switch off your scanner.
To Next Page
Loading...
