Appendix A — Using the transparency option 33
Appendix A — Using the transparency option
The transparency option is an optional item that allows you to scan transparencies. This appendix
describes the procedure for installing the transparency option if you have bought one for your
StudioStar.
Unpacking the transparency option
Unlocking the transparency option
Connecting the transparency option
Unpacking the transparency option
The first thing to do is to make sure you have everything you are supposed to.
1. Open the packing box and take out all the items.
2. Check each item to make sure that you have everything and that there is no visual defect.
If something is missing, contact your dealer.
3. Remove the plastic wrapping and the packing materials from the transparency option.
4. Fill out the Warranty and Registration card. You will find the product serial number on the
identity label on the rear of your transparency option.
❖ Note: Save the packing materials so that you can repack the transparency option to protect it if
you have to move it over long distances.
To Next Page
Loading...
