74
To set DPOF on a single image/all images:
1. Select Single or All on the DPOF submenu.
2. For single image, use the or keys to scroll and
select an image to mark for printing.
3. Specify the number of copies. Use the or to
increase/decrease number.
4. Press the FUNC button to toggle between turning on/
off the date stamp.
5. Press the SET button to save DPOF settings.
To reset DPOF:
1. Select Reset on the DPOF submenu. A confirmation
message appears.
2. Select Yes.
3. Press the SET button to reset DPOF settings.
You can specify up to 99 copies for DPOF. If you specify 0 copies, the DPOF setting of
that image is automatically disabled.
DPOF
Date stamp off
00
00
Copies
Yes
Cancel
Reset DPOF?
Note
To Next Page
Loading...
