Quick Reference – 1
11
Front Panel Number Entry
Enter numbers from the front panel using one of the following methods:
Use the arrow keys and knob to change voltage or current settings
NOTE The output must be ON to see the displayed values change in Meter mode.
Use the Function keys and knob to change the displayed settings
Use the Arrow keys to edit individual digits in the displayed setting
Increments the flashing digit
Decrements the flashing digit
Moves the flashing digit to the right
Moves the flashing digit to the left
Enters the value when editing is complete
Use the Function keys and Entry keys to enter a new value
NOTE If you make a mistake, use the Backspace key to delete the number, or press the Meter
key to return to meter mode.
To Next Page
Loading...
Need help?
General
