Configuration 5
Advanced Operation 71
then the system is ready for next analysis. Receiver is any
sequence controller.
Start (Low True): Request to start run/timetable. Receiver
is any module performing runtime- controlled activities.
Start Relay (Contact Closure): A 120 millisecond contact
closure. Used as an isolated output to start another device
that is not compatible or connected with APG Remote pin 3.
Figure 13 APG Remote timing diagram
Waiting for ready
System ready
Start requested
Injection cycle started
Injection/Start
Run
Runtime elapsed/Start
Postrun
Waiting for ready
System ready
H
L
L
H
H
Start
Ready
To Next Page
Loading...
Need help?
General
