Configuration 5
Advanced Operation 77
4
To use the custom wakeup method, select Wakeup. To use
the last active method, select Prior active method.
5 Set the wakeup and sleep times for each day of the week.
• Press [Off/No] to disable wake or sleep for that day.
The HS will not load the selected method (wake or
sleep).
• Enter the time to load the wakeup or sleep method,
using a 24- hour clock. For example, to enter 6 PM,
input 1800, [Enter]. To enter 7:45 AM, input 0745, [Enter].
6 Load the sleep method and edit as desired. Save the
method.
7 If using the Wakeup method, load it and edit as desired.
Save the method.
To turn off the instrument schedule, set Sleep/Wake Enable
and to Off.
To Next Page
Loading...
