30 7820A GC Installation Manual
7820A GC Installation Guide
Set Permanent GC and PC IP Addresses
Your PC and GC are currently connected directly through
a LAN cable. If this PC runs your data system, and you
have no other GCs, you can leave the system as-is.
However, to connect to more than one GC, or to connect
the GC and computer to a site network, you must:
1 Change the GC IP address to be compatible with your
site LAN. Refer to the GC Operating Guide for details.
2 Restore or change the PC IP Address to be compatible
with the site LAN and the GC.
To Next Page
Loading...
Need help?
General
