7820A GC Installation Guide
7820A GC Installation Manual 7
7820A GC Installation
Place and Prep the GC
1 Verify the site has been prepared for the GC.
• Refer to the 7820A GC Site Preparation Guide on
the GC and GC/MS User Manuals & Tools DVD.
• Make sure the site meets the requirements in the
guide, including power, and that clean gases and
connection hardware are available.
• Installation requires a PC that meets the
requirements of the Agilent Instrument Utility.
Refer to the GC and GC/MS User Manuals & Tools
DVD for details.
• Installation requires a PC user with administrative
privileges to install software and to make LAN
communications settings.
• If you purchased installation and familiarization
services, make sure the GC operator is available.
WARNING
Use extreme caution when handling heavy parts. A two
person lift is recommended. Failure to perform a two person
lift may result in personal injury.
To Next Page
Loading...
Need help?
General
