Chapter 7 505
Language Reference
MEAS Measurement Status
MEAS Measurement Status
Syntax
Figure 7-151 MEAS Syntax
Description
The MEAS command query returns the current sweep status. If the
spectrum analyzer is set to sweep and make measurements
continuously, the command returns CONTS. If it is set to make a single
sweep with a single measurement, it returns SNGLS.
The spectrum analyzer can be set to single sweep and continuous sweep
using the SNGLS and CONTS commands.
Parameters
SNGLS, CONTS
Example
FILLER TEXT
Query Response
Figure 7-152 MEAS Query Response
10 OUTPUT 718;"MEAS?;"
20 ENTER 718;Sweepstat$
To Next Page
Loading...
Need help?
General
