3-23
Function Reference
Display Mode
Display Mode
Accesses the choice of log (logarithmic) or lin (linear) data display.
Key Path Amplitude > Display mode
Remote
Commands
DISPlay:WINDow:TRACe:Y:SCALe:SPACing LINear|LOGarithmic
Display Setup
Accesses the display setup panel selections which include:
• active function area assist
• Agilent logo
• date/time
• filter mode instrument panels
• path change instrument panel
• title
The Display Setup panel
Setup panel
selections
Agilent Logo
When this function is
ON, the Agilent logo is shown on the display and print-
outs.
Date/Time
Turns the date and time
ON or OFF on the display.
To Next Page
Loading...
