3-31
Function Reference
GPIB Address
GPIB Address
Accesses the GPIB address information. To change the address, use the
numerical entry keys, step keys, or knob to enter the new GPIB address infor-
mation. If changes are made, press the Select softkey. Press the Defaults soft-
key to reset the address to the factory preset default, 23.
Key Path System > More System Functions > GPIB Address & Network Setup > GPIB
Address
GPIB & Network Setup
Accesses the functions used to set up networked file and printer shares on the
analyzer.
• GPIB Address
• Configure Network
• User Share Identity
• File Shares
• Printer Shares
Key Path System> More System Functions > GPIB Address & Network Setup
Help
Accesses error queues for: hardware errors, critical errors, notices, and warn-
ings once an error queue is accessed. Also displays the instrument’s current
firmware revision. Refer to “Firmware Upgrade” on page 3-30You can print the
queue, clear the queue, or page up and down to view the information. If no
hardware errors, critical errors, notices, or warnings have been generated,
these functions will be shaded.
Key Path System > Help
Remote
Commands
SYSTem:ERRor?
*IDN?
To Next Page
Loading...
Need help?
General
