5-35
Status Listings
OSA Status Errors
OSA Status Errors
Table 5-8. OSA Status Errors
Error Number Error Description [description/explanation/examples]
10000 desc = “Sweep Uncalibrated”
help = “The current setting of sweep time may be too fast. This could result in an
invalid measurement. In certain cases it is possible to sweep faster than the
coupled sweep time without compromising measurement accuracy. Please refer
to the users manual and relevant application notes for more information.”
11998 desc = “Too Many Hardware Status Errors”
help = “The Hardware Status Error list has overflowed. Additional more recent
items have been deleted.”
To Next Page
Loading...
Need help?
General
