1-10
Getting Started
Setting Up the Analyzer
CAUTION Do not stack other objects on the keyboard; this will cause self-test failures on
power-on.
You can connect a PCL-language printer (for example, an HP
1
LaserJet) to the
instrument’s rear panel Parallel connector. Use a parallel Centronics printer ca-
ble, such as an HP C2950A (2 m) or HP C2951A (3 m).
The line cord provided is matched by Agilent Technologies to the country of
origin on the order. Refer to “Accessories” on page 1-31.
1. HP and Hewlett-Packard are U.S. registered trademarks of Hewlett-Packard Company.
To Next Page
Loading...
Need help?
General
