4-8
Remote Front Panel Operation
Remote Front Panel
a In the Client Connection area (left side of the window), select hpux.rxc.
b In the Method field, select Telnet.
c In the Host Name field, select the name assigned to the OSA.
d In the User Name field, enter osaadm.
e In the Password field, enter osaosa1.
f In the Command field, you will need to modify the existing command as
follows:
(usr/bin/x11/hpterm -fn 6x13 -sb -ls -display %IP#% -name %T% -exec etc/map_display &)
g Click Connect to start the remote front panel controller.
3 Continue to “Using the Remote Front Panel” on page 4-15.
To Next Page
Loading...
Need help?
General
