EasyManuals Logo

Agilent Technologies ACQIRIS CC103 User Manual

Agilent Technologies ACQIRIS CC103
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
1.5. Disclaimer and Safety
WARNING : The CC10X crate contains voltage hazardous to human life and safety, and is capable of inflicting
personal injury. For your safety, before undertaking any troubleshooting or maintenance
procedure, read carefully the WARNING and CAUTION notices.
Crate Grounding : The CC10X crate requires a connection from the premises wire safety ground to the CC10X
chassis ground to minimize shock hazard. This crate is designed with a three-position
IEC320 C14 plug that connects the earth safety ground line to the chassis ground. A power cord with protective
safety ground conductor must be used. The earth safety ground line must be always connected during use of this
equipment. To minimize shock hazard, make sure your electrical power outlet has an appropriate earth safety ground
that is connected whenever you power up the crate.
Live Circuits : Operating personnel must not remove protective covers when operating or servicing the CC10X crate.
Adjustments and service to internal components must be undertaken by qualified personnel. During service of this
product, the mains connector to the premise wiring must be disconnected. Dangerous voltages may be present under
certain conditions, use extreme caution.
Explosive Atmosphere : Do not operate the crate in conditions where flammable gases are present. Under such
conditions this crate is unsafe and may ignite the gases or gas fumes.
Part Replacement : Only service this crate with parts that are exact replacements, both electrically and mechanically.
Installation of parts that are not exact replacements may cause harm to personnel operating the crate. Furthermore,
damage or fire may occur if replacement parts are suitable.
Modification : Do not modify any part of the crate from its original condition. Unsuitable modifications may result
in safety hazards.
Lifting and Carrying: An empty U1091AC83 (CC108-800) crate weighs up to 11.3 kg (25 lb). A fully loaded crate
could weigh up to 23.3 kg (51 lb). Thus, either one person can lift or carry an empty crate or handles need to be
attached and two persons have to manipulate a loaded crate. The smaller crates can be manipulated by one person.
WARNING : If an instrument handle is damaged, you should replace it immediately. Damaged handles can break
while you are moving or lifting the instrument and cause personal injury or damage to the instrument.
1.6. Warning Regarding Medical Use
The CC10X crates are not designed with components and testing intended to ensure a level of reliability suitable for
use in treatment and diagnosis of humans. Applications of these crates involving medical or clinical treatment can
create a potential for accidental injury caused by product failure, or by errors on the part of the user. These crates are
not intended to be substitute for any form of established process or equipment used to monitor or safeguard human
health and safety in medical treatment.
WARNING : The modules discussed in this manual have not been designed for making direct measurements on
the human body. Users who connect an Acqiris module to a human body do so at their own risk
1.7. Packaging and Handling
After carefully unpacking all items, inspect each to ensure there are no signs of visible damage. Check to make sure
that all hardware and the switch are undamaged. Inspect the inner chassis for any possible damage, debris, or
detached components. If damage appears to have been caused in shipment, file a claim with the carrier. Also check
that all the components received match those listed on the enclosed packing list. Agilent cannot accept responsibility
for missing items unless we are notified promptly of any discrepancies. If any items are found to be missing or are
received in a damaged condition please contact the Agilent service center or your local supplier immediately. Retain
the box and packing materials for possible inspection and/or reshipment.
Verify that you have received the following items with your CC10X crate :
Power cord
Power Cord Rating Reference Standards
Universal Europa 250V/10A CEE7 sht/IEC320 C13
North America 125V/10A NEMA 5-15/IEC320 C13
United Kingdom 250V/10A BS1363A/IEC320 C13
User Manual: Agilent Acqiris 3-, 5-, and 8-slot cPCI Crates Page 5 of 28

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Agilent Technologies ACQIRIS CC103 and is the answer not in the manual?

Agilent Technologies ACQIRIS CC103 Specifications

General IconGeneral
BrandAgilent Technologies
ModelACQIRIS CC103
CategoryTest Equipment
LanguageEnglish

Related product manuals