Agilent Technologies Agilent 7700 Series ICP-MS User Manual

2 G7200-90210 (Rev. A) MassHunter Workstation Quick Start Guide
Startup 3
Preparing for Analysis 4
Things to check before analysis 4
Prepare tuning solutions 4
Ignite the plasma 5
Check tuning 6
Setting Quantitative Method Parameters
12
Set up a Quantitative Method 12
Access Method parameters directly 19
Use the Method Wizard to create a method 19
Running the Samples
21
Set up the Sequence 21
Analyze the samples 23
Quantitative Data Analysis 25
Typical scenarios for Data Analysis 25
Open an existing batch for data analysis 26
Creating a new batch for data acquisition 26
Create the Data Analysis (DA) method for Quantitative data analysis 28
Process the batch 32
View analysis results 33
Save analysis results 34
Generate a report 34
Semi-Quantitative Analysis 35
Prepare for SemiQuant Analysis 35
Create a SemiQuant acquisition method 35
Analyze the samples 37
Create a new batch or open a new batch for SQ data analysis 37
Create the Data Analysis (DA) method for Quantitative data analysis 28
Process the batch 40
Correcting the Semiquant Factors 41
Change the SemiQuant Factors 42

Agilent Technologies Agilent 7700 Series ICP-MS Specifications

General

Brand	Agilent Technologies
Model	Agilent 7700 Series ICP-MS
Category	Desktop
Language	English