G7200-90210 (Rev. A) MassHunter Workstation Quick Start Guide 19
Access Method parameters directly
You can access some method panels directly, using the following menu items:
Use the Method Wizard to create a method
This way of creating a method makes it easy to create methods for
environmental analyses, since it supplies many of the parameters that are
appropriate for various sample types and regulations.
1 Select Run Method Wizard from the Methods menu in ICP- MS Top.
General Items 2 Enter name for the method and click the Next> button.
Sample 3 Select the sample as follows:
a Select Environmental as the Application Type.
b Select a Sample, such as Drinking Water or High TDS. A description of
the current selection is displayed in the lower part of the window.
c Select a Regulation, such as EPA200.8 or EPA6020. Only the guidelines
that apply to the selected sample are displayed.
d Click the Next> button.
Method parameters Window Menu Menu item
Method Information ICP-MS Top Methods Edit Method Information
Select Sample Items,
Select QC Items
(Intelligent Sequence
Software is installed)
ICP-MS Top Methods Select QC Items
Interference Equation ICP-MS Top Methods Edit Interference Equation
Acquisition Mode Acquisition EditParameters Set Mode
Spectrum Acquisition
Parameters
Acquisition EditParameters Set Parameters
Peristaltic Pump
Program
Acquisition PeriPump Set Peripump Program
Method Save Options ICP-MS Top Methods Save As
To Next Page
Loading...
Need help?
General