G7200-90210 (Rev. A) MassHunter Workstation Quick Start Guide 27
2 Import the samples as follows:
a Select Import Samples from the File menu.
b Navigate to the data file folder where the data files of interest are located
and click the Open button. The data files in that folder are displayed on
the Import Samples dialog box.
c To import samples from another folder, click the Browse button.
d Repeat Steps b and c until all samples of interest are displayed on the
Import Samples dialog box.
e Select the samples to import:
• <Ctrl>+click to select multiple samples from the list.
• Click the Select All button to select all samples in the list.
f Click OK.
To Next Page
Loading...