4
Instructions for Use
General Information
40/140 Dual Stage Rotary Vane Pumps User Manual/ 87-900-937-01(L)
General Information
This equipment is destined for use by professionals. The user should
read this instruction manual and any other additional information
supplied by Agilent before operating the equipment. Agilent will not
be held responsible for any events occurring due to non-compliance,
even partial, with these instructions, improper use by untrained
persons, non-authorized interference with the equipment or any
action contrary to that provided for by specific national standards.
The DS102 1Ph, DS202 1Ph, DS302 1Ph, DS402 1Ph, DS402 3Ph,
DS602 1Ph and DS602 3Ph pumps are dual-stage, rotary vane pumps
oil sealed, driven by a single-phase or three-phase electric motor.
These high vacuum pumps are suitable for pumping non corrosive
gases.
The following paragraphs contain all the information necessary to
guarantee the safety of the operator when using the equipment.
Detailed information is supplied in the appendix "Technical
Information".
To Next Page
Loading...
