5
Technical Description
Safety Rules
76/140 Dual Stage Rotary Vane Pumps User Manual/ 87-900-937-01(L)
If the pump is expected to be stopped for a lengthy period, or in any
case if it has pumped in large amounts of vapors, it is good practice
to run it with the gas ballast open and the inlet line closed for a few
minutes before switching off in order to limit the risk of corrosion or
scaling due to pollution of the oil by condensed vapors.
Safety Rules
Personnel responsible for pump operation and maintenance must be
well-trained and must be aware of the accident prevention rules.
The accident prevention precautions contained in this section must
be respected at all times during operation and maintenance of the
pump to avoid damage to operators and to the pump.
These precautions are provided in the form of WARNING and
CAUTION notes.
WARNING!
Operating procedures, technical information and precautions which, if not
respected and/or implemented correctly may cause body harm to operators.
CAUTION!
Operating procedures, technical information and precautions which, if not
respected and/or implemented correctly may cause damage to the pump.
Warning Notes
c Death may result from contact with high voltages. Always take
extreme care and observe the accident prevention regulations in
force.
To Next Page
Loading...
Need help?
General
