5
Technical Description
Lubricants
80/140 Dual Stage Rotary Vane Pumps User Manual/ 87-900-937-01(L)
slack joints or couplings.
Maintenance technicians must:
be aware of all applicable national directives concerning accident
prevention during work on motor-driven pumps and should
know how to apply them;
have read and understood all the sections on “Safety Rules";
be familiar with the essential design features and operation of the
pump;
know how to use and consult the pump documentation;
be concerned about proper operation of the pump;
make a note of any irregularities in operation of the pump and
take the necessary action, where appropriate.
Use original spare parts wherever possible and repair a broken part
as best as possible on site or send it back to the manufacturer for
repairs.
For all problems arising, or to order spare parts, refer to our service
department.
Agilent Technologies Italia S.p.A.
Vacuum Products Division
Via F.lli Varian 54 10040 Leini, (Torino) – Italy
Tel.: +39 011 997 9111
Fax: +39 011 997 9350
Toll-Free: 00 800 234 234 00
Lubricants
It will be readily understood how important adequate lubrication is
to high technology pumps like the Agilent vacuum pumps. Correct
use of appropriate lubricants makes a significant contribution to
achieving best performance and warding off defects.
When handling lubricants, the following sanitary protection
measures should be observed at all times:
To Next Page
Loading...
Need help?
General
