Technical Description
Electrical motors
5
Dual Stage Rotary Vane Pumps User Manual/ 87-900-937-01(L) 69/140
WARNING!
Disconnect the motor from the mains before opening the electrical box.
The motors are factory set to operate at 200-240 V (50/60 Hz)
nominal voltages.
To modify the voltage setting, change the position of the voltage
selector situated inside the motor electrical box.
To confirm the change of the voltage setting from High Voltage to Low
Voltage, glow the orange label above the yellow label positioned on
the electrical box cover.
WARNING!
Close the motor electrical box cover before connecting to the main.
To Next Page
Loading...
