Agilent Technologies E3647A - SCPI Conformance Information; SCPI Conformance Information Starting

Chapter 4 Remote Interface Reference
SCPI Conformance Information
121
4
SCPI Conformance Information
The power supply conforms to the ‘1996.0’ version of the SCPI standard. Many of
the commands required by the standard are accepted by the power supply but are not
described in this manual for simplicity or clarity. Most of these non-documented
commands duplicate the functionality of a command already described in this manual.
SCPI Confirmed Commands
The following table lists the SCPI-confirmed commands that are used by the power
supply.
DISPlay
[:WINDow][:STATe] {OFF|ON}
[:WINDow][:STATe]?
[:WINDow]:TEXT[:DATA] <quoted string>
[:WINDow]:TEXT[:DATA]?
[:WINDow]:TEXT:CLEar
INITiate[:IMMediate]
INSTrument[:SELect] {OUTPut1|OUTPut2|OUT1|OUT2}
[:SELect]?
:NSELect {1|2}
:NSELect?
:COUPLe
[:TRIGger] {ON|OFF}
[:TRIGger]?
MEASure
:CURRent[:DC]?
[:VOLTage][:DC]?
OUTPut
[:STATe] {OFF|ON}
[:STATE]?