Chapter 4 Remote Interface Reference
SCPI Command Summary
75
4
SCPI Command Summary
This section summarizes the SCPI (Standard Commands for Programmable
Instruments) commands available to program the power supply over the remote
interface. Refer to the later sections in this chapter for more complete details on each
command.
Throughout this manual, the following conventions are used for SCPI command
syntax.
• Square brackets ([ ]) indicate optional keywords or parameters.
• Braces ({ }) enclose parameters within a command string.
• Triangle brackets (< >) indicate that you must substitute a value or a code for the
enclosed parameter.
• A vertical bar ( | ) separates one of two or more alternative parameters.
First-time SCPI users, see page 115.
SCPI
To Next Page
Loading...
Need help?
General
