Agilent Technologies E3647A User Manual

Chapter 5 Error Messages
Execution Errors
132
800 Outputs coupled by track system
This error occurs when coupling the outputs if the track mode is already enabled.
Tracking mode should be disabled first when coupling the outputs.
801 Outputs coupled by trigger subsystem
This error occurs when enabling the track mode if the outputs are already coupled.
Outputs should be uncoupled first to enable the power supply to operate in the track
mode.

Agilent Technologies E3647A Specifications

General

Brand	Agilent Technologies
Model	E3647A
Category	Power Supply
Language	English