Agilent Technologies E4403B User Manual

Chapter 7 7-3
Options and Accessories
B7D Digital Signal Processing and
Fast ADC
••••
B7E RF Communications Hardware ••••
B7K Distance to Fault Accessory Kit ••••
BAA FM Demodulation •• •••
BAB APC 3.5 Input Connector ••
BAC cdmaOne Measurement Personality ••••
BAH GSM Measurement Personality ••••
UE2 Firmware Upgrade Kit ••••••••
UKB Low Frequency Extension •••
UK6
Commercial Calibration
2
••••••••
UK9 Front Panel Cover ••••••••
W32 3 Year Calibration Contract ••••••••
W50 5 Year Service Support ••••••••
W52 5 Year Calibration Contract ••••••••
1. Option 1D5 is only available at time of purchase, except for the Agilent E4401B spectrum
analyzer which can be retrofitted.
2. This option is only available at time of purchase.
3. This option has a 75 Ohm output impedance, and is only available with Option 1DP.
4. Option B7B requires Option BAA.
Table 7-1 Option Table
Option
E4411B E4401B E4402B E4403B E4404B E4405B E4407B E4408B

Agilent Technologies E4403B Specifications

General

Brand	Agilent Technologies
Model	E4403B
Category	Measuring Instruments
Language	English