Agilent Technologies E4418B Service Guide

Adjustments
Display Brightness and Contrast Adjustment
Agilent E4418B/E4419B Service Guide 3-11
Display Brightness and Contrast Adjustment
Introduction
The following procedure should be performed whenever a front panel
assembly or processor assembly are replaced.
The brightness is controlled automatically after executing the
softkey, located under the softkey menu.
Note The contrast adjustment is subjective and varies according to
individual user requirements.
Procedure
1. Access the softkey menu and use the softkey to
increase the contrast, or the softkey to decrease the contrast
of the display.
2. When the desired display contrast level is obtained, press the
softkey, located under the softkey
menu.
Set Brightness Service
Display
Set Contrast Service
4402serv.book Page 11 Tuesday, October 14, 2003 3:18 PM

Agilent Technologies E4418B Specifications

General

Brand	Agilent Technologies
Model	E4418B
Category	Measuring Instruments
Language	English