Theory of Operation
A3 Front Panel Assembly
Agilent E4418B/E4419B Service Guide 4-7
A3 Front Panel Assembly
The front panel assembly is made up of a liquid crystal display (LCD), a
keypad and, depending on the power meter option, a power reference cable
assembly and a sensor cable assembly(s).
There are two inputs to the front panel assembly:
• the flex circuit from connector A2J4 of the processor assembly
which controls the keypad.
• the ribbon cable from A2J3 of the processor assembly which
controls the LCD display.
The power meter self tests contain display tests. These are accessed by
pressing , , , , ,
.
Inputs
More
Service Self Test Individual
Display
4402serv.book Page 7 Tuesday, October 14, 2003 3:18 PM
To Next Page
Loading...
