Specifications
Power Meter Supplemental Characteristics
1-6 Agilent E4418B/E4419B Service Guide
Power Meter Supplemental Characteristics
Measurement Speed
Over the GP-IB, three measurement speed modes are available as shown,
along with the typical maximum measurement speed for each mode:
• Normal: 20 readings/second
• x2: 40 readings/second
• Fast: 200 readings/second, for Agilent E-series power sensors only
Maximum measurement speed is obtained using binary output in free run
trigger mode.
Zero Drift of Sensors
Power sensor dependent (refer to Table 1-3).
4402serv.book Page 6 Tuesday, October 14, 2003 3:18 PM
To Next Page
Loading...
