Chapter 4
Front-Panel Key and SCPI Command Reference
Measurement keys
196
Front-Panel Key and SCPI Command
Reference
4.4.4.2 AMPLITUDE/Y Scale
The AMPLITUDE/Y Scale key accesses the menu to set the desired vertical scale and associated settings.
Default numbers are independent for each window.
4.4.4.2.1 AM Depth Numeric Results Window
If Numeric Result Window is chosen, the following menu is available.
4.4.4.2.1.1 Display Mode
If measurement results are to be displayed relative to a reference, enter the value as a ratio reference by selecting RATIO.
4.4.4.2.1.2 Display Unit
Sets the unit for Normal display.
Mode: MRECEIVE
Key Path:
Amplitude Y Scale
Remote Command: :DISPlay:AMDepth:MODE NORMal|RATio
:DISPlay:AMDepth:MODE?
Preset: NORMal
State Saved: Saved in instrument state.
Range: Normal | Ratio
Example: :DISP:AMD:MODE NORM
:DISP:AMD:MODE?
Mode: MRECEIVE
Key Path:
Amplitude Y Scale
Remote Command: :DISPlay:AMDepth:UNIT PCT|DB
:DISPlay:AMDepth:UNIT?
Preset: PCT
State Saved: Saved in instrument state.
Range: % |dB
Example: :DISP:AMD:UNIT PCT
:DISP:AMD:UNIT?
To Next Page
Loading...
Need help?
General
