Chapter 2 139
Instrument Functions: A - L
File
Instrument Functions: A - L
2.6.8 Delete All
Deletes all the files on a floppy disk; any information on the disk will be destroyed.
Key Type: Branch
Key Notes: This key displays the file manager display form which includes data entry
fields for the new drive name and path.
There is another definition of Format key that defines the format (file
type) of you data that you want to save.
Remote Command:
There is no remote command for this key.
2.6.8.1 Delete All Now
Executes the Delete All function. After pressing Delete All, the following message will appear
on the display: WARNING: You are about to destroy ALL data on volume A: Press
Delete All again to proceed or any other key to abort. While deleting, a popup
message is displayed “Deleting All.” After a successful floppy disk file deletion, the green
text message “Volume A: delete complete”, appears in the status line.
Key Path:
File, Delete All
Remote Command:
There is no remote command for this key.
2.6.9 Query Trace Data (Remote Command Only)
This command queries trace data from the specified trace. The data format is set by the
command :FORMat [:TRACe][:DATA]. When ASCII format is selected, the data is
comma-separated ASCII values. Real or Interger format uses a definite length block of
data.
Thenumber of trace points returned is set by [:SENSE]:SWE:POIN (from 101 to 8192).
To Next Page
Loading...
Need help?
General
