Agilent Technologies E4445A User Manual

146 Chapter 2
Instrument Functions: A - L
FREQUENCY / Channel
Instrument Functions: A - L
2.7.3 Stop Freq
Sets the frequency at the right side of the graticule and sets the frequency entry mode to
Start/Stop. When the Start/Stop Frequency entry mode is activate, the start and stop
frequency values are displayed below the graticule in place of center frequency and span.
The left and right sides of the graticule correspond to the start and stop frequencies.
Key Path:
FREQUENCY
State Saved: Saved in Instrument State
Factory Preset:
Range:
Remote Command:
[:SENSe]:FREQuency:STOP <frequency>
[:SENSe]:FREQuency:STOP?
Example: FREQ:STOP 1600
FREQ:STOP?
Model Stop Frequency
E4440A 26.50000000 GHz
E4443A 6.70000000 GHz
E4445A 13.20000000 GHz
E4446A 44.00000000 GHz
E4448A 50.00000000 GHz
Model Frequency Range
E4440A –100.0000000 MHz to 27.0 GHz
E4443A –100.0000000 MHz to 13.7 GHz
E4445A –100.0000000 MHz to 7.2 GHz
E4446A –100.0000000 MHz to 44.5 GHz
E4448A –100.0000000 MHz to 51.0 GHz

Agilent Technologies E4445A Specifications

General

Brand	Agilent Technologies
Model	E4445A
Category	Measuring Instruments
Language	English