Agilent Technologies E4445A User Manual

Chapter 3 191
Instrument Functions: M - O
Meas Control
Instrument Functions: M - O
3.5 Meas Control
These functions allow you to pause and resume the currently selected measurement and to
select between continuous or single measurements.
NOTE If no measurement has been selected from the MEASURE menu, these
functions are not available.
Key Path: Front-panel key
3.5.1 Restart
This function restarts a previously paused measurement at the beginning. If the current
measurement is still in process, it will stop it as soon as possible and restart it from the
beginning.
Key Path: Front-panel key. It can also be found under
Meas Control.
Remote Command:
:INITiate:RESTart
Remote Command Notes: This command is equivalent to sending an :ABORt command
followed by an :INITiate[:IMMediate] command. See “Abort the Sweep or
Measurement (Remote Command Only)” on page 194
. for more information.
Example: INIT:REST

Agilent Technologies E4445A Specifications

General

Brand	Agilent Technologies
Model	E4445A
Category	Measuring Instruments
Language	English