Agilent Technologies E4445A User Manual

Chapter 3 187
Instrument Functions: M - O
Marker ->
Instrument Functions: M - O
3.3.5 Mkr∆->Span
Sets the start and stop frequencies to the values of the delta markers. The marker is then
set to normal at the center frequency. Only available in
Delta, Span Pair, and Delta Pair
modes, this function is not available if the marker is off, or in Normal mode or when the
span is
Zero Span.
Key Path:
Marker ->
Remote Command:
:CALCulate:MARKer[1]|2|3|4[:SET]:DELTa:SPAN
Remote Command Notes: Select the delta marker mode with
:CALCulate:MARKer[1]|2|3|4:MODE DELTa.
Example: CALC:MARK2:DELT:SPAN sets the start and stop frequencies to the values of
the delta markers of marker 2.
3.3.6 Mkr∆->CF
Sets the delta marker to the center frequency. Only available in Delta, Span Pair, and Delta
Pair
modes, this function is not available if the marker is off, or in Normal mode or when the
span is
Zero Span.
Key Path:
Marker ->
History: Added with firmware revision A.02.00
Remote Command:
:CALCulate:MARKer[1]|2|3|4[:SET]:DELTa:CENTer
Remote Command Notes: Select the delta marker mode with
:CALCulate:MARKer[1]|2|3|4:MODE DELTa.
Example: CALC:MARK2:DELT:CENT sets the center frequency to the value of the delta
marker center frequency of marker 2.

Agilent Technologies E4445A Specifications

General

Brand	Agilent Technologies
Model	E4445A
Category	Measuring Instruments
Language	English