Chapter 2 35
cdma2000/IS-2000 Mobile Test Application
How Do I Make Measurements on a Mobile?
B. Select measurements.
1. Press the Measurement selection key.
2. Highlight a measurement and press the knob.
3. Repeat steps 1 and 2 to add measurements.
2
1
The gray boxes indicate
that the measurement is
being made, but the results
are not being displayed.
These black boxes indicate
that access probe power
measurement results are
being displayed in the lower
measurement window, and
channel power results are
being displayed in the upper
measurement window.
To Next Page
Loading...
