Chapter 2 29
Programming Examples
Using the Programming Examples
• National Instruments PCI- GPIB interface card or Agilent GPIB interface card
• National Instruments VISA Library or Agilent VISA library
• COM1 or COM2 serial port available
• LAN interface card
The Agilent BASIC examples were run on a UNIX 700 Series workstation
Running C/C++ Programming Examples
To run the example programs written in C/C++ you must include the required files in the Microsoft Visual
C++ 6.0 project.
If you are using the VISA library do the following:
• add the visa32.lib file to the Resource Files
• add the visa.h file to the Header Files
If you are using the NI-488.2 library do the following:
• add the GPIB-32.OBJ file to the Resource Files
• add the windows.h file to the Header Files
• add the Deci-32.h file to the Header Files
Refer to the National Instrument website for information on the NI-488.2 library and file requirements. For
information on the VISA library see the Agilent website or National Instrument’s website.
To Next Page
Loading...
